Please remember when ordering online at The Plastic People we have a minimum order value of £36.00 plus VAT. Otherwise a surcharge will be incurred.
 
 

Recycled Clear Acrylic Sheet

from £0.30

Offer: £9.96 standard delivery. Checkout today!
Recycled Clear Acrylic Sheet image
Recycled Clear Acrylic Sheet
Recycled Clear Acrylic Sheet
Recycled Clear Acrylic Sheet
Recycled Clear Acrylic Sheet

Step 1 - Choose Colour & Size



mm
Maximum: 1525mm
mm
Maximum: 2050mm

Step 2- Optional Extras

Read more about Rubber Stops

Rubber Stops

Use our CLEAR Round Self Adhesive Rubber Stops on your Furniture Protector for a more secure finish or if you are concerned about possible slippage. Our packs contain 20 Rubber Stops.

The Rubber Stops are approximately 11mm x 2mm in size and made of clear polyurethane coated with a powerful pressure sensitive adhesive to the back.
 
In practice we have found that using a pad approximately every 300mm to 500mm is extremely effective in stopping the furniture protector from moving about when in use.


 

 

Read more about Polished Edges

Polished Edges

Our Polished Edge Service provides a high gloss shine to the edges of your plastic.  We polish  edges either with a flame or diamond polishing.  Simply tick the box to select this service.

Read more about Number of Holes

Number of Holes

Please enter how many holes you would like drilling.

Location - If you order standard holes we will drill 5mm holes centred 25mm from the edges in each corner or evenly spaced (depending on how many you order) unless you tell us otherwise.  For panels 150mm wide or less the holes will be centred 15mm from the edge of the material unless you tell us otherwise. To avoid compromising the material, holes cannot be centred any closer to the edge than 15mm. If you order less than four holes please tell us where you would like them drilled.  

Size -  we drill holes to a maximum diameter of 20mm. If you need anything above this size please order it as as 'Cut-Out'.

Giving Us Instructions - you can specify your hole diameter and location as you checkout. Please provide your instructions in our 'Special Comments’ box which you will see before you pay for your order. 

Alternatively, if you have a drawing you can upload it and attach it with your order.

That’s it. If we have any question’s we’ll be in touch. Thanks.

Read more about Hole Types

Holes Type

We can drill stndard holes or counter sunk holes.  Please choose from our menu.

If you require advice, please contact our friendly team on 0113 249 2222.

Read more about Cut Outs

Cut Outs


We can cut shapes out of your plastic for you. For example, socket holes in acrylic splashbacks.

Please upload a drawing showing what you would like with sizes marked on.

If you need any assistance, please call our friendly team on 0113 249 2222.
 
Read more about Hole Position Design

Sending Us A Drawing

If you'd like to send us a drawing to show any requirements please upload it here.

It will come to us along with your order.

​ You can upload a PDF or an image with any of the following extensions:

  • .gif
  • .pdf
  • .png
  • .jpg
  • .jpeg
Read more about Screws

Screws

Our screws are 3.5mm x 30mm wall screws

Read more about Screw Covers

Screw Covers

Our screw covers are chrome effect

Please note: Screw covers are not suitable for use with countersunk holes. 
If you wish to use our screw covers, please select 'Standard Holes' from the drop down menu.

Read more about Rounded Corners

Rounded Corners

Please enter how many corners you would like rounded.  If you require less than four corners rounding please tell us which corners they are.  

Radius - We will round corners with a 25mm radius unless you tell us otherwise.  If you would like to specify the radius you can do so as you checkout

Giving Us Instructions -  . Please provide your instructions in our 'Special Comments’ box which you will see before you pay for your order.  Alternatively, if you have a drawing you can upload it and attach it with your order.

That’s it. If we have any question’s we’ll be in touch. Thanks.

£0.30
Get Quote Via Email Read more about 'Add to quote'
Send quote via email

Not ready to order yet? Get an instant quote via email to continue later or to send to your colleague to order.

Customer Projects

 
 
 
 
 
 
 
 
 
 
 

Want To Know More...

Recycled Clear Perspex Acrylic Sheets - Recycled Plastic Sheets

Here at The Plastic People, we take acrylic recycling seriously and pride ourselves on providing the best recycled acrylic to suit your specific needs, whatever they may be.

We sell high-quality and multi-purpose, environmentally friendly recycled acrylic sheets made from recycled clear acrylic.

  • Recycled Extruded Clear Acrylic Sheets - Up to 90% recycled content
  • Produced from customer and production waste, the recycled acrylic sheets contain between 70% and 90% recycled content.
  • Recycled plastic sheet available cut to any size or shape and produced in a clear finish with 92% light transmission.
  • Ideal for both indoor and outdoor applications and offering outstanding chemical  and weathering resistance. 


Our recycled acrylic sheets are ideal for 

  • Secondary glazing
  • Greenhouse and shed glazing
  • POS displays
  • Kitchen splashbacks
  • Table protectors 
  • and any project you can think of.



Simply enter your specifications into the quote calculator above and you’re good to go. Choose the required thickness, width and length in either millimetres, centimetres or inches for your recycled plastic sheet– and get a free quote today.

We can also cut recycled acrylic to bespoke shapes to suit any project. Just email across a drawing and we’ll send you a quote depending on the size and complexity of what you require. 

Delivery Options

When it comes to delivery for you recycled plastic sheet, there are a few options.

You can pay for next day delivery if you want your order to arrive promptly, or even select a specific day of your preference with named day delivery.

However, unless you choose otherwise, all orders will be delivered using our standard delivery service.

To ensure our recycled acrylic glass sheets reach you in perfect condition, rest assured that we cover them with a protective film surface ahead of delivery.

So, why not complete your very own made to measure order today with The Plastic People?

OPTICAL QUALITY: Whilst our recycled acrylic is as clear as our non-recycled option, due to the increased use of recycled material, recycled extruded acrylic may not be able to conform with ISO standards regarding black spots and other inclusions.

Related Products

Are Acrylic and Perspex the same ?
Perspex is a brand name for acrylic (in the same way that hoover is a brand name for a vaccum cleaner).  There are other brands of acrylic too – such as Plexiglass.
 
Can acrylic be used behind a hob ?

Acrylic can be used for kitchen splashbacks but the following distances should be kept between the outer edge of your hob and the acrylic: at least 60mm for ceramic hobs and at least 200mm for gas hobs. Acrylic is not suitable for use behind an Aga or similar range cooker.
See our splashback pages for further details.

Can acrylic be used in bathrooms ?
Acrylic can be used for bathroom splashbacks, shower splashbacks and bath panels. 

Acrylic can be delivered at a maximum size of 3m x 2m meaning it is possible to cover a large area without the need for any seams (this means no more grouting !). 

Because acrylic is so light, lfting acrylic and fixing it to walls is a fairly straightforward DIY task.  See our acrylic splashbacks for further details.
 
Can I buy acrylic offcuts?
Our acrylic is sold cut to size so we can supply what you need.  Working in this way we reduce our offcuts anda nything too small to reuse is collected for recycling.
How can I clean acrylic ?
We suggest simply use warm soapy water and a soft cotton cloth.   Any chemical cleaner should be avoided as it is likely to damage the acrylic.  If you would like to use a cleaning product we suggest our specialist acrylic cleaner and polish Vuplex.
 
How can I cut acrylic sheets
You can cut acrylic at home yourself - learn how to do it here.
How can I cut Perspex
Cutting Perspex can be done at home - see our guide on how to do it here.
How do I dispose of acrylic?
For recycling purposes plastics are categorised into 7 groups. Acrylic sheet is classified as group 7. Although group 7 plastics can be recycled most councils do not collect it in their curb side collections.
The best way to dispose of unwanted acrylic sheet is to take it to your local council household waste and recycling centre.
How do I remove scratches from acrylic?
Scratches can be removed from acrylic and this is something you can do yourself. Learn how by reading our blog post with step by step instructions of how to remove scratches from acrylic
 
How does acrylic compare to other plastics in strength?
In terms of strength and impact resistance, Polycarbonate is stronger than acrylic and is virtually unbreakable followed by PET/PETG and then acrylic. To put this into perspective with glass - acrylic is around 10 times stronger than glass and polycarbonate is around 200 times stromger than glass.
How flexible is acrylic?
Acrylic is relatively flexible compared to glass - it does bend. Thin acrylic sheets will bend more easily than thicker acrylic sheets.  If you over-flex acrylic it can crack or break.  If you require your acrylic bending we can do this for you, please email us with your requirements and we will be happy to help.
 
How scratch resistant is acrylic?
Acrylic is reasonably hard wearing but will scratch if something sharp or abrasive is put on it. 
Surface scratches can be removed from acrylic with a proprietary acrylic scratch remover.
Please see our blog post with step by step instructions of how to remove scratches from acrylic
 
How should I clean acrylic ?
The team here at The Plastic People are often asked about how to care for acrylic.  Acrylic should not be cleaned with chemical cleaners as this will very likely lead to damage.  Cleaning acrylic should be with warm soapy water and a soft cotton cloth.  We are impressed with a cleaning product called Vuplex which polishes acrylic to a high shine in minutes, keeping acrylic looking like brand new.   It also protects new plastic from scratches and grime and restores plastic which has fine scratches and in ground grime. 
​
How strong is acrylic?
In impact resistance tests, acrylic has been found to be between 10 - 20 times stronger than glass.
Is acrylic better than glass ?
Acrylic is 17 x stronger than glass and about half the weight of glass.

This means it is physically easier to lift, hang, carry or transport around and safer at the same time too.  Should acrylic be dropped, it is much less likely to break too.  If it does break, it will not shatter in the same way as glass.  It would not break into tiny sharp shards but into a couple of large, easy to pick up pieces.  This makes it ideal for situations where safety is paramount.

Acrylic is also clearer than glass and actually transmits more light than glass.  

 

Is acrylic heat resistant ?

Acrylic is heat resistant up to 70 degrees.

 

Is acrylic safe for food?
Acrylic is food safe and will not leach toxic chemicals like BPA.
Is acrylic suitable for outdoor use ?

Yes, acrylic can be used outside.

Is clear acrylic suitable for secondary glazing ?
Yes, acrylic is a good choice for secondary glazing. 

The benefits of secondary glazing include increased thermal and sound insulation as well as extra security. Acrylic’s light weight and flexibility make it very easy to install yourself at home and the extremely high light translucence means there will be no noticable reduction in light entering the room.

For extra security consider using polycarbonate sheeting which is roughly 30 times stronger than acrylic and is also ideal for secondary glazing.
 
What are the advantages of acrylic over glass?
- Acrylic is very clear - it lets through 92% of the visible light as opposed to 80% to 90% for glass.
- Glass reflects more light than acrylic and the thicker the glass the more discolouration you will notice. No matter what the thickness of clear acrylic, it will always be clear.
- Scratches can be polished out of acrylic but scratched glass cannot be repaired.
- Acrylic does not shatter into sharp shards like glass. Acrylic breaks into large pieces with relatively blunt edges.
- Acrylic scratches easier than glass but surface scratching can be polished out of acrylic while glass would most likely need to be replaced.
- Acrylic is 20% more efficient than glass in reducing temperature flux which means that the outside temperature penetrates the acrylic less easily that it would penetrate glass.
What are the benefits of acrylic splashbacks?
Acrylic is a popular choice for splashbacks. The main benefits of acrylic splashbacks are:
- Versatility - acrylic can be cut to shape and size, is easily fabricated to accommodate socket holes or bends in walls
- Durablilty - acrylic is very strong and has a high impact resistance meaning it is very unlikely to break (like glass or tiles)
- Hygienic - acrylic is safe to use with food. Acrylic does not harbour bacteria and is very easy to wipe clean. The splashback can often be seamless meaning no more grout lines.
- Longevity - coloured acrylic is highly resistant to fading.
- Lightweight - meaning you can easily lift it to fit.
What is the difference between Perspex and acrylic ?
What is known as Perspex is really a brand of acrylic.

Acrylic is common thermoplastic.  It's chemical name is polymethyl methacrylate (PMMA).  PMMA was invented in 1933.  Acrylic became available for commercial use under various protected trademarks such as Perspex®.  Other trademarks include are Plexiglas®,  Acrylite®,  Altuglas® and Lucite Plazcryl®,.
Why should I use acrylic instead of glass?
Acrylic is a great alternative to glass in that it is  about half the weight and 10 times the strength or glass making it a safer material. In addition, acrylic:
- Insulates better than glass
- Takes less energy to make             
- Offers higher impact resistance where glass can be more easily broken, becoming hazardous
- Provides better optical clarity
- Can be easily fabricated or shaped
- Can be polsihed to remove any scratching where glass cannot
 

We offer standard, next day and named day delivery services.

Our larger orders are delivered via specialist couriers and we will email you the day before their delivery.  

Whichever delivery option you choose, you will see your expected delivery date before you checkout. If you choose our standard delivery, this date is an estimate.

Standard Delivery - £9.96 

All orders are delivered using our standard delivery service unless you choose our next day service.  
 
Standard delivery is usually 5 - 7 working days. Orders with optional extras or cut-to-shape pieces can take longer.

Where possible, we will let you know if something is going to take longer than expected.


Standard delivery dates are estimated so please allow time to receive and check your order before you need to use the material or before contractors are due to begin work. If you need your delivery for a specific day, consider using either our Next Day or Named Day shipping services.

There are certain postcodes where we cannot deliver to at our offer price of £9.00. They are postcodes with prefix letters PA and PH (charged at £30) and BT, GY, HS, IM, IV, JE, KW, PO Isle of Wight, TR and ZE (charged at £40). 


Next Day Delivery -  £33.00 

We can deliver orders for clear acrylic, polycarbonate (up to 12mm thick) and silver acrylic mirror next day.  Where next day delivery is available we will offer you this choice during checkout. 

Please order before 1pm.  Orders received after 1pm will be delivered the following working day after. Working days are Monday to Friday; weekends and public holidays are excluded.

If any items ordered on a next day delivery are out of stock, we will contact you to organise alternative arrangements.

Named Day Delivery - £24.00

We have listened to your feedback & can now offer a named day delivery service across all of our products. 

Just add your plastic to your basket and select Named Day as the delivery option, and then pick your chosen delivery day. 

No more guessing when your parcels will arrive.

Simple!


  
Safe Delivery
If we think that your order cannot be delivered safely using our standard service, we will contact you to let you know and discuss the delivery options with you. This normally is only the case for orders so large they need to be delivered on a pallet.

We recommend you allow time between receiving your delivery and starting any work in case any part of your order needs to be replaced.


Collection - 
You are welcome to collect your order at our Trade Counter - please select this option during checkout.  This service is free.
 

Our Trade Counter is open from 8am until 4pm Monday to Thursday and 8am until 3pm on Fridays. We are closed on weekends and bank holidays.


To find out more about our delivery service and charges, please click here to visit our delivery information page.

Help & Advice

Acrylic is an incredibly versatile clear plastic that is suitable for lots of different projects.  If you are unsure about choosing a clear plastic, help your decision-making by reading our helpful article what are the differences between acrylic and polycarbonate 

We're always happy to help you with specifics and hope that as a starting point the links below to the most popular projects using acrylic might help:

We are also pleased to share further information about how to care for acrylic:


Customer Stories

Be inspired by how our customers have used clear acrylic - see pictures of their projects:


Do you have a question ? 

We have lots of Questions and Answers on our menu above specifically about Clear Acrylic but feel free to email us too. We are always happy to help.



Data Sheet


Download Data Sheet