We can now laser or CNC cut & shape almost any material, from sheet plastics like Acrylic to Polycarbonate and now sheet wood including MDFPlywood and OSB.
 
 

Acrylic Mirror

from £0.30

Offer: £9.96 standard delivery. Checkout today!
Acrylic Mirror image
Acrylic Mirror
Acrylic Mirror
Acrylic Mirror
Acrylic Mirror

Step 1 - Choose Colour & Size



mm
Maximum: 1525mm
mm
Maximum: 2030mm

Step 2- Optional Extras

Read more about Polished Edges

Polished Edges

Our Polished Edge Service provides a high gloss shine to the edges of your plastic.  We polish  edges either with a flame or diamond polishing.  Simply tick the box to select this service.

Read more about Number of Holes

Number of Holes

Please enter how many holes you would like drilling.

Location - If you order standard holes we will drill 5mm holes centred 25mm from the edges in each corner or evenly spaced (depending on how many you order) unless you tell us otherwise.  For panels 150mm wide or less the holes will be centred 15mm from the edge of the material unless you tell us otherwise. To avoid compromising the material, holes cannot be centred any closer to the edge than 15mm. If you order less than four holes please tell us where you would like them drilled.  

Size -  we drill holes to a maximum diameter of 20mm. If you need anything above this size please order it as as 'Cut-Out'.

Giving Us Instructions - you can specify your hole diameter and location as you checkout. Please provide your instructions in our 'Special Comments’ box which you will see before you pay for your order. 

Alternatively, if you have a drawing you can upload it and attach it with your order.

That’s it. If we have any question’s we’ll be in touch. Thanks.

Read more about Hole Types

Holes Type

We can drill stndard holes or counter sunk holes.  Please choose from our menu.

If you require advice, please contact our friendly team on 0113 249 2222.

Read more about Cut Outs

Cut Outs


We can cut shapes out of your plastic for you. For example, socket holes in acrylic splashbacks.

Please upload a drawing showing what you would like with sizes marked on.

If you need any assistance, please call our friendly team on 0113 249 2222.
 
Read more about Hole Position Design

Sending Us A Drawing

If you'd like to send us a drawing to show any requirements please upload it here.

It will come to us along with your order.

​ You can upload a PDF or an image with any of the following extensions:

  • .gif
  • .pdf
  • .png
  • .jpg
  • .jpeg
Read more about Screws

Screws

Our screws are 3.5mm x 30mm wall screws

Read more about Screw Covers

Screw Covers

Our screw covers are chrome effect

Please note: Screw covers are not suitable for use with countersunk holes. 
If you wish to use our screw covers, please select 'Standard Holes' from the drop down menu.

Read more about Rounded Corners

Rounded Corners

Please enter how many corners you would like rounded.  If you require less than four corners rounding please tell us which corners they are.  

Radius - We will round corners with a 25mm radius unless you tell us otherwise.  If you would like to specify the radius you can do so as you checkout

Giving Us Instructions -  . Please provide your instructions in our 'Special Comments’ box which you will see before you pay for your order.  Alternatively, if you have a drawing you can upload it and attach it with your order.

That’s it. If we have any question’s we’ll be in touch. Thanks.

£0.30
Get Quote Via Email Read more about 'Add to quote'
Send quote via email

Not ready to order yet? Get an instant quote via email to continue later or to send to your colleague to order.

What Our Customers Say...

5 stars from our customers
Excellent
Based on 27 reviews
See some of the reviews here.

Customer Projects

 
 
 

Want To Know More...

Acrylic Mirrors – Why Choose Cut to Size Plastic Mirrors


Here at The Plastic People, we cut our acrylic mirror to the exact size or shape you need.

Our lightweight mirror panels are a safer alternative to glass. That's because they are shatter proof, mark-resistant and 17x stronger than glass. As a result, they’re ideal for use in public spaces, outdoor areas and are even popular in dance studios, gyms and gardens.

We reccomend ordering 5mm thickness for mirrors over 1m. Acrylic is flexible and this can cause distortions in the reflection. Using 5mm thickness for larger mirrors will help to reduce this. 


Acrylic mirrors cut to size for home or garden 

If you'd like to create the feeling of a larger garden, a lighter garden or perhaps make a special feature or two – garden mirrors cut to size are perfect.

Our mirrors can also be used indoors. In the home, they can be used as child safe mirrors for playrooms - and as mentioned above, they’re also common in fitness studios.

You can even place an acrylic cut to size mirror inside stables. Horse mirrors are safe alternatives to glass – and still provide the animals with that element of comfort and companionship.

Ordering your acrylic mirror

We cut our acrylic mirror sheets to the exact size you need.  Simply enter your measurements in our Quote Calculator above.

  • We also cut sheets to shape. Access this service via the Cut To Shape tab which you'll find at the top of our Quote Calculator.
  • If you'd like to send us a drawing of your requirements you can also upload it using our Quote Calculator.  It will arrive with our team once you have placed your order through our checkout.
  • Something else to tell us?  If you have any other special comments, you can let us know in the Comments box as you checkout.

That's it. If we have any questions, we'll be in touch. Alternatively, email us a drawing of your requirements for a quote. We're happy to help.
If you'd like to speak with our friendly team they can reached on 0113-249-2222.

How to fit acrylic mirrors

If you are bonding Mirrored Acrylic to wood, brick, plaster and other wall substrates, check out our acrylic mirror adhesive which can be successfully used without any adverse effect on the mirrored acrylic. This adheisve is for indoor use only, if you're putting the mirror outside, please contact us for details of a suitable adhesive.   

Another option is to have oversized holes drilled into your acrylic mirror and hold it to the wall with screw fasteners. If you are using screws to fix your mirror, we would recommend a screw hole approximately every 300mm all the way around the material for a secure fit. 

Because acrylic mirror is more flexible than glass it must be fitted to a flat surface for a perfect finish.  If you are fitting it to a wall which is not flat, or are not sure, it is best to fit it first to something rigid such as three quarter inch plywood to reduce distortion. 

Download our handy acrylic mirrors guide for more information on working with your mirror.


Cleaning acrylic mirrors


Keeping your mirror looking clean and shiny is very straightforward – although there are a few things to bear in mind.

You should always avoid using solvents to clean acrylic. Chemical cleaners can damage the surface of the plastic and do more harm than good – so it’s better to stick to a soft cotton cloth and warm water.

Related Products

Are polycarbonate mirrors suitable for high security environments ?
Polycarbonate mirrors are ideal for demanding, high security environments. Our polcarbonate mirrors will not break, melt (if burned) and graffitti wipes off them.
 
Can acrylic mirror be used in bathrooms ?
Yes acrylic mirror is water resistant and can be used in the bathroom. We recommend silicone sealing around the edges.
Can acrylic mirror be used outside and in the garden ?
Yes acrylic mirror can be used outdoors but please remember that all mirrors can intensify and concentrate sun rays and generate focused heat spots. Care should be taken to avoid positioning in direct sunlight.
Acrylic mirror will weather outdoors over time with changes in temperature and moisture. The mirror will still be attractive and reflective but will have a more weathered appearance.
Can you deliver polycarbonate mirror cut to size ?
Yes we are happy to do so.  Please select the size of polycarbonate mirror from our Ordering Menu above and as you checkout you will see a Special Notes box.  Simply write in there the size you would like us to cut to.  We offer this as a complementary service.
How are polycarbonate mirrors different to acrylic mirrors ?
Our polycarbonate mirror is much stronger than acrylic mirror.  Indeed, they will not smash and should they get burned they will not melt.  They also have UV protection anti graffiti properties so graffiti can be simply wiped off with plastic cleaner.
How does acrylic mirror compare to glass ?
Acrylic mirror is not as rigid as glass mirror.  Acrylic mirror is half the weight of glass and at the same time much stronger.  It is also more flexible   Because it is flexible some visual distortion may occur when it is used.  Distortion can be exaggerated when using large pieces.  This can be reduced and better visual integrity can be gained by using thicker pieces of acrylic mirror (because it will be less flexible) along with careful and correct installation.  Visual distortion is not a manufacturing fault but an inherent characteristic of the material. For more information about Acrylic mirrors please see this page.
How should acrylic mirror be fitted to a wall or wardrobe door ?
For best results make sure the wall or door is completely flat and has no imperfections. If this isn’t possible or you are unsure we suggest the acrylic mirror is first mounted onto a thick MDF sheet.  Only use specialist Acrylic Mirror adhesive or mechanically fix your mirror using screws.  If you fix with screws, please leave some room in the hole for the acrylic mirror to expand and contract. This can be done by making the hole size slightly bigger than the screw.  
How should I clean acrylic ?
The team here at The Plastic People are often asked about how to care for acrylic.  Acrylic should not be cleaned with chemical cleaners as this will very likely lead to damage.  Cleaning acrylic should be with warm soapy water and a soft cotton cloth.  We are impressed with a cleaning product called Vuplex which polishes acrylic to a high shine in minutes, keeping acrylic looking like brand new.   It also protects new plastic from scratches and grime and restores plastic which has fine scratches and in ground grime. 

We offer standard, next day and named day delivery services.

Our larger orders are delivered via specialist couriers and we will email you the day before their delivery.  

Whichever delivery option you choose, you will see your expected delivery date before you checkout. If you choose our standard delivery, this date is an estimate.

Standard Delivery - £9.96 

All orders are delivered using our standard delivery service unless you choose our next day service.  
 
Standard delivery is usually 5 - 7 working days. Orders with optional extras or cut-to-shape pieces can take longer.

Where possible, we will let you know if something is going to take longer than expected.


Standard delivery dates are estimated so please allow time to receive and check your order before you need to use the material or before contractors are due to begin work. If you need your delivery for a specific day, consider using either our Next Day or Named Day shipping services.

There are certain postcodes where we cannot deliver to at our offer price of £9.00. They are postcodes with prefix letters PA and PH (charged at £30) and BT, GY, HS, IM, IV, JE, KW, PO Isle of Wight, TR and ZE (charged at £40). 


Next Day Delivery -  £33.00 

We can deliver orders for clear acrylic, polycarbonate (up to 12mm thick) and silver acrylic mirror next day.  Where next day delivery is available we will offer you this choice during checkout. 

Please order before 1pm.  Orders received after 1pm will be delivered the following working day after. Working days are Monday to Friday; weekends and public holidays are excluded.

If any items ordered on a next day delivery are out of stock, we will contact you to organise alternative arrangements.

Named Day Delivery - £24.00

We have listened to your feedback & can now offer a named day delivery service across all of our products. 

Just add your plastic to your basket and select Named Day as the delivery option, and then pick your chosen delivery day. 

No more guessing when your parcels will arrive.

Simple!


  
Safe Delivery
If we think that your order cannot be delivered safely using our standard service, we will contact you to let you know and discuss the delivery options with you. This normally is only the case for orders so large they need to be delivered on a pallet.

We recommend you allow time between receiving your delivery and starting any work in case any part of your order needs to be replaced.


Collection - 
You are welcome to collect your order at our Trade Counter - please select this option during checkout.  This service is free.
 

Our Trade Counter is open from 8am until 4pm Monday to Thursday and 8am until 3pm on Fridays. We are closed on weekends and bank holidays.


To find out more about our delivery service and charges, please click here to visit our delivery information page.

Polished Edges

Our Polished Edge Service provides a high gloss shine to the edges of your plastic.  We polish  edges either with a flame or diamond polishing.  Simply tick the box to select this service.

 

Number of Holes

When selecting how many holes need drilling, please see the below advice.

Location - If you order standard holes we will drill 5mm holes centred 25mm from the edges in each corner or evenly spaced (depending on how many you order) unless you tell us otherwise. 

For panels 150mm wide or less the holes will be centred 15mm from the edge of the material unless you tell us otherwise. To avoid compromising the material, holes cannot be centred any closer to the edge than 15mm.

If you order less than four holes please tell us where you would like them drilled.  

Size -  we drill holes to a maximum diameter of 20mm. If you need anything above this size please order it as as 'Cut-Out'.

Giving Us Instructions - you can specify your hole diameter and location as you checkout. Please provide your instructions in our 'Special Comments’ box which you will see before you pay for your order. 

Alternatively, if you have a drawing you can upload it and attach it with your order.

 

Hole Type

We can drill standard holes or counter sunk holes.  Please choose from our menu.

Please note: Screw covers are not suitable for use with countersunk holes. 
If you wish to use our screw covers, please select 'Standard Holes' from the drop down menu.

 

Cut Outs

We can cut shapes out of your plastic for you. For example, socket holes in acrylic splashbacks.

Please upload a drawing showing what you would like with sizes marked on.

 

Screws

Our screws are 3.5mm x 30mm wall screws

 

Screw Covers

Our screw covers are chrome effect

 

Rounded Corners

Please enter how many corners you would like rounded.  If you require less than four corners rounding please tell us which corners they are.  

Radius - We will round corners with a 25mm radius unless you tell us otherwise.  If you would like to specify the radius you can do so as you checkout

Giving Us Instructions -  . Please provide your instructions in our 'Special Comments’ box which you will see before you pay for your order.  Alternatively, if you have a drawing you can upload it and attach it with your order.

That’s it. If we have any question’s we’ll be in touch. Thanks.

Download: How To Work With Acrylic Mirror

 

 



Data Sheet


Download Data Sheet