Easyfix really is easy to fit yourself. All you need is a ballpoint pen, a craft knife, a tape measure and a screwdriver. When using the Easyfix Kit, glazing panels may be fitted to opening windows to allow for ventilation and use of the windows or to the main window frame for maximum insulation and draught proofing. This kit comprises of 5m of flexible white PVC edging strip suitable for use with 2mm acrylic, 24 nylon fixing clips, 24 wood screws, a mitre block for perfect corner cuts on the edging and easy to follow instructions. This kit contains screws for fitting to wooden frames. Self tapping screws which are recommended for metal frames can be purchased from your local DIY supplier. How to order your acrylic panel - simply enter the measurements of your desired panel on our cut to size acrylic page here Please make sure that you order your acrylic in a thickness of 2mm only and that your panel will overlap your window frame by 10mm on all four sides. Please be aware that if the total measurement all the way round your panel is more than 5m you will need to purchase more than one Easyfix Secondary Glazing Fitting Kit. Helpful Hints - The edging strip is always easier to work with when it’s warm. We suggest placing it in the airing cupboard or similar place the night before use. When placing edging strip onto glass DO NOT run finger down the back of the edging strip to apply it quickly, work a few centimetres at a time.
Sorry, there are currently no Accessories for this product.
For large windows, such as 1200mm x 1200mm or bigger, you can place a couple of screws immediately below the secondary glazing panel to add support and prevent the chance of it slipping or detaching.