We can now laser or CNC cut & shape almost any material, from sheet plastics like Acrylic to Polycarbonate and now sheet wood including MDFPlywood and OSB.
 
 

Coloured Acrylic Splashbacks

from £0.30

Offer: £9.96 standard delivery. Checkout today!
Coloured Acrylic Splashbacks image
Coloured Acrylic Splashbacks
Coloured Acrylic Splashbacks
Coloured Acrylic Splashbacks
Coloured Acrylic Splashbacks

Step 1 - Choose Colour & Size

Select Colour
Yellow 229




















mm
Maximum: 1220mm
mm
Maximum: 2440mm

Step 2- Optional Extras

Read more about Polished Edges

Polished Edges

Our Polished Edge Service provides a high gloss shine to the edges of your plastic.  We polish  edges either with a flame or diamond polishing.  Simply tick the box to select this service.

Read more about Number of Holes

Number of Holes

Please enter how many holes you would like drilling.

Location - If you order standard holes we will drill 5mm holes centred 25mm from the edges in each corner or evenly spaced (depending on how many you order) unless you tell us otherwise.  For panels 150mm wide or less the holes will be centred 15mm from the edge of the material unless you tell us otherwise. To avoid compromising the material, holes cannot be centred any closer to the edge than 15mm. If you order less than four holes please tell us where you would like them drilled.  

Size -  we drill holes to a maximum diameter of 20mm. If you need anything above this size please order it as as 'Cut-Out'.

Giving Us Instructions - you can specify your hole diameter and location as you checkout. Please provide your instructions in our 'Special Comments’ box which you will see before you pay for your order. 

Alternatively, if you have a drawing you can upload it and attach it with your order.

That’s it. If we have any question’s we’ll be in touch. Thanks.

Read more about Hole Types

Holes Type

We can drill stndard holes or counter sunk holes.  Please choose from our menu.

If you require advice, please contact our friendly team on 0113 249 2222.

Read more about Cut Outs

Cut Outs


We can cut shapes out of your plastic for you. For example, socket holes in acrylic splashbacks.

Please upload a drawing showing what you would like with sizes marked on.

If you need any assistance, please call our friendly team on 0113 249 2222.
 
Read more about Hole Position Design

Sending Us A Drawing

If you'd like to send us a drawing to show any requirements please upload it here.

It will come to us along with your order.

​ You can upload a PDF or an image with any of the following extensions:

  • .gif
  • .pdf
  • .png
  • .jpg
  • .jpeg
Read more about Screws

Screws

Our screws are 3.5mm x 30mm wall screws

Read more about Screw Covers

Screw Covers

Our screw covers are chrome effect

Please note: Screw covers are not suitable for use with countersunk holes. 
If you wish to use our screw covers, please select 'Standard Holes' from the drop down menu.

Read more about Rounded Corners

Rounded Corners

Please enter how many corners you would like rounded.  If you require less than four corners rounding please tell us which corners they are.  

Radius - We will round corners with a 25mm radius unless you tell us otherwise.  If you would like to specify the radius you can do so as you checkout

Giving Us Instructions -  . Please provide your instructions in our 'Special Comments’ box which you will see before you pay for your order.  Alternatively, if you have a drawing you can upload it and attach it with your order.

That’s it. If we have any question’s we’ll be in touch. Thanks.

£0.30
Get Quote Via Email Read more about 'Add to quote'
Send quote via email

Not ready to order yet? Get an instant quote via email to continue later or to send to your colleague to order.

What Our Customers Say...

4.5 stars from our customers
Excellent
Based on 16 reviews
See some of the reviews here.

Customer Projects

 
 
 

Want To Know More...

Why choose our coloured acrylic splashbacks?

The Plastic People's coloured acrylic splashbacks are perfect for DIYer's, designers, builders, renovators and architects where a stunning image upgrade is needed quickly and cost effectively in homes or businesses. 

Our coloured Perspex splashbacks are created by our plastic experts using premium coloured acrylic renowned for its depth of colour, durability, flexibility and workability. The result is a hand crafted splashback with sensational colour providing a high end look at a fraction of the cost of similar solutions. Acrylic Splashbacks are ideal for kitchens, bathrooms, vanities, spa surroundings, commercial fit outs, commercial wet areas, counter/bar fronts, as decorative wall features, for shop fittings and signage. 

How To Order Your Splashback

  1. Please use our Cut To Size Quote Calculator above - firstly, choose your colour then enter your measurements 
  2. Let us know which Optional Extras you'd like. For example, the number of holes or socket holes you need.
  3. Upload your drawing to show us your requirements (for example, where your socket hole(s) should go ). Your drawing will arrive with our team once you have placed your order through our checkout.

Bigger Sizes Available 

If the splashback you require is larger than online ordering will allow, please contact our friendly team of plastic experts who will be happy to help.

Special Shapes
  1. We also cut splashbacks to shape. Access this service via the Cut To Shape tab which you'll find at the top of our Quote Calculator.  
  2. Choose from the popular shapes we have available
  3. Upload your drawing to show us your requirements (for example, where your socket hole(s) should go ). Your drawing will arrive with our team once you have placed your order through our checkout.
  4. You can also let us know about any special comments you may have in the Comments box as you checkout.

Alternatively, email us a drawing of your requirements for a quote. We're happy to help.  We recommend you purchase a sample to check colour before placing orders.

If you'd like to speak with our friendly team they can reached on 0113 249 2222.

Other Colours

Follow these links to see our hi-gloss splashbacks, sparkle splashbacks, matt splashbacks and clear splashbacks. If you're looking for a special colour, please speak with our friendly team who may be able to source it for you. Alternatively, head over to our acrylic splashbacks page to see our full range of bathroom and kitchen splashbacks.

Easy Maintenance 

  • Our acrylic splashbacks keep dust and grease marks off much more than stainless steel and glass. 
  • Because there are few, if any, joins - our splashbacks are considered much more hygienic than those of steel and glass.
  • Use warm water with a small amount of mild detergent and a soft cotton cloth to clean your coloured splashback.
Alternatively we're very impressed with the results from acrylic cleaner VuPlex which polishes acrylic to a high shine in seconds. Keep your splashback looking like new by adding VuPlex acrylic cleaner to your order today.

Simple Installation

  • Our coloured splashbacks are half the weight of an equivalent glass sheet and 25 x more impact resistant - this makes them very light and safe to handle
  • Fitting is typically 4 x faster than glass splashbacks or ceramic tiles
  • Our splashbacks can be screwed to new and existing walls.  We can pre-drill holes for you, just select them in our form above. We suggest you order your holes and screws every 500mm.
  • Our non translucent splashbacks can also be fixed to new and existing walls using adhesive.  We recommend the wall area is prepared white and Strong Stuff adhesive is thinly and evenly spread across the entire splashback before fixing into place. Please note that Strong Stuff dries white, not clear. A 200ml tube covers approx 2 square metres.

Read our blogs about How To Measure and Install A Splashback for step by step advice.

Hob Safe

  • All our splashbacks can be used behind hobs.  The distance between the outer edge of a ceramic hob and the wall must be at least 60mm. The distance for gas hobs must be atleast 200mm.

Related Products

Strong Stuff
Strong Stuff
from £11.65 inc VAT
Fixings - Pack of 12
Fixings - Pack of 12
from £6.78 inc VAT
 
Can I fit an acrylic splashback myself ?

Because our acrylic splashbacks are so light they are very easy to lift and manoeuvre making fitting fairly easy. They can be either screwed or glued to your wall.  If you choose a clear or translucent splashback we recommend  fitting the splashback with screws because adhesive will be visible through clear and translucent acrylic.
 

Fitting is typically 4 x faster than glass splashbacks or ceramic tiles.

Can I put an acrylic splashback behind a hob ?
Acrylic splashbacks can go behind hobs but a safe distance must be kept. 
The distance between the outer edge of a ceramic hob and the wall must be at least 60mm. 
The distance for gas hobs must be at least 200mm.
 
Do coloured silicones match coloured acrylic splashbacks ?
We have tried and tested a range of coloured silicones to go with our coloured splashbacks and have hand picked those which are a close match and work well.  
How can I see the true colour of this plastic ?
Colours tend to vary on screen depending on your screen resolution, operating system, web browser and preferences you may have set up.  For this reason, it is always best to order a sample to see the true colour of any plastic you are considering buying.
How do I measure up for a splashback ?
To produce a splashback for your space we will need measurements of that area – for example, the length and width and measurements for any special cut outs. Alternatively you can always make a template of the area and post it to use if that is easier.
 
How many screw holes should I have on my splashback to fit it safely ?
We recommend that there are screws fixed approximately every 300mm.
 
How much adhesive will I need to fit a splashback ?
If you choose to glue your splashback to your wall area we recommend using Strong Stuff adhesive spread thinly and evenly across the back of the entire splashback before fixing into place. Please note that Strong Stuff dries white, not clear. A 200ml tube covers approx 2 square metres.
 
How should acrylic splashbacks be cleaned ?
We are often asked about the best way to care for acrylic splashbacks.

Acrylic splashbacks can be cleaned with warm soapy water and a soft cotton cloth.  Most splashbacks will be seamless — just wipe them  clean with water, there’s no longer any worry about bacteria being trapped in grout.

No chemical cleaning products should be used on acrylic as this will lead to damage to the acrylic. 

Alternatively, we are very impressed with suitable cleaner Vuplex for a shiny, cleaner, more lustrous finish with no smears or smudges. It makes colored plastics vibrant, clear plastics virtually transparent and plastic paints gleaming like new.  Vuplex is a product which delivers fast quality results with minimal effort and fuss. It also protects new plastic from scratches and grime and restores plastic which has fine scratches and in ground grime.
Is acrylic heat resistant ?

Acrylic is heat resistant up to 70 degrees.

 

We offer standard, next day and named day delivery services.

Our larger orders are delivered via specialist couriers and we will email you the day before their delivery.  

Whichever delivery option you choose, you will see your expected delivery date before you checkout. If you choose our standard delivery, this date is an estimate.

Standard Delivery - £9.96 

All orders are delivered using our standard delivery service unless you choose our next day service.  
 
Standard delivery is usually 5 - 7 working days. Orders with optional extras or cut-to-shape pieces can take longer.

Where possible, we will let you know if something is going to take longer than expected.


Standard delivery dates are estimated so please allow time to receive and check your order before you need to use the material or before contractors are due to begin work. If you need your delivery for a specific day, consider using either our Next Day or Named Day shipping services.

There are certain postcodes where we cannot deliver to at our offer price of £9.00. They are postcodes with prefix letters PA and PH (charged at £30) and BT, GY, HS, IM, IV, JE, KW, PO Isle of Wight, TR and ZE (charged at £40). 


Next Day Delivery -  £33.00 

We can deliver orders for clear acrylic, polycarbonate (up to 12mm thick) and silver acrylic mirror next day.  Where next day delivery is available we will offer you this choice during checkout. 

Please order before 1pm.  Orders received after 1pm will be delivered the following working day after. Working days are Monday to Friday; weekends and public holidays are excluded.

If any items ordered on a next day delivery are out of stock, we will contact you to organise alternative arrangements.

Named Day Delivery - £24.00

We have listened to your feedback & can now offer a named day delivery service across all of our products. 

Just add your plastic to your basket and select Named Day as the delivery option, and then pick your chosen delivery day. 

No more guessing when your parcels will arrive.

Simple!


  
Safe Delivery
If we think that your order cannot be delivered safely using our standard service, we will contact you to let you know and discuss the delivery options with you. This normally is only the case for orders so large they need to be delivered on a pallet.

We recommend you allow time between receiving your delivery and starting any work in case any part of your order needs to be replaced.


Collection - 
You are welcome to collect your order at our Trade Counter - please select this option during checkout.  This service is free.
 

Our Trade Counter is open from 8am until 4pm Monday to Thursday and 8am until 3pm on Fridays. We are closed on weekends and bank holidays.


To find out more about our delivery service and charges, please click here to visit our delivery information page.

Help & Advice

For more help, advice and examples of innovative use of plastic throughout the home and garden, why not visit our blog.