The Plastic People – Christmas Opening Times
Please ensure all your pre-Christmas orders are with us by 16th December to avoid disappointment – Our offices close on Monday 23rd December & re-open on Thursday 2nd January as usual. See our socials for opening times and delivery schedules!
 
 

White Polypropylene Sheet Cut to Size

from £0.30

Offer: £9.96 standard delivery. Checkout today!
White Polypropylene Sheet Cut to Size image

Step 1 - Choose Colour & Size



mm
Maximum: 2440mm
mm
Maximum: 1220mm

Step 2- Optional Extras

Read more about Number of Holes

Number of Holes

Please enter how many holes you would like drilling.

Location - If you order standard holes we will drill 5mm holes centred 25mm from the edges in each corner or evenly spaced (depending on how many you order) unless you tell us otherwise.  For panels 150mm wide or less the holes will be centred 15mm from the edge of the material unless you tell us otherwise. To avoid compromising the material, holes cannot be centred any closer to the edge than 15mm. If you order less than four holes please tell us where you would like them drilled.  

Size -  we drill holes to a maximum diameter of 20mm. If you need anything above this size please order it as as 'Cut-Out'.

Giving Us Instructions - you can specify your hole diameter and location as you checkout. Please provide your instructions in our 'Special Comments’ box which you will see before you pay for your order. 

Alternatively, if you have a drawing you can upload it and attach it with your order.

That’s it. If we have any question’s we’ll be in touch. Thanks.

Read more about Hole Types

Holes Type

We can drill stndard holes or counter sunk holes.  Please choose from our menu.

If you require advice, please contact our friendly team on 0113 249 2222.

Read more about Cut Outs

Cut Outs


We can cut shapes out of your plastic for you. For example, socket holes in acrylic splashbacks.

Please upload a drawing showing what you would like with sizes marked on.

If you need any assistance, please call our friendly team on 0113 249 2222.
 
Read more about Hole Position Design

Sending Us A Drawing

If you'd like to send us a drawing to show any requirements please upload it here.

It will come to us along with your order.

​ You can upload a PDF or an image with any of the following extensions:

  • .gif
  • .pdf
  • .png
  • .jpg
  • .jpeg
Read more about Screws

Screws

Our screws are 3.5mm x 30mm wall screws

Read more about Screw Covers

Screw Covers

Our screw covers are chrome effect

Please note: Screw covers are not suitable for use with countersunk holes. 
If you wish to use our screw covers, please select 'Standard Holes' from the drop down menu.

Read more about Rounded Corners

Rounded Corners

Please enter how many corners you would like rounded.  If you require less than four corners rounding please tell us which corners they are.  

Radius - We will round corners with a 25mm radius unless you tell us otherwise.  If you would like to specify the radius you can do so as you checkout

Giving Us Instructions -  . Please provide your instructions in our 'Special Comments’ box which you will see before you pay for your order.  Alternatively, if you have a drawing you can upload it and attach it with your order.

That’s it. If we have any question’s we’ll be in touch. Thanks.

£0.30
Get Quote Via Email Read more about 'Add to quote'
Send quote via email

Not ready to order yet? Get an instant quote via email to continue later or to send to your colleague to order.

What Our Customers Say...

4 stars from our customers
Great
Based on 4 reviews
See some of the reviews here.

Customer Projects

Want To Know More...

White Polypropylene Sheet

Cut to size white polypropylene sheets are available to order to your bespoke requirements with The Plastic People. 

Perfectly suited to a variety of useful manufacturing appliances - white polypropylene has a number of benefits which are listed below. 

We can provide you with a quote today if you know your measurements - just get started with the quote calculator above. 

What is white polypropylene?

Essentially, white polypropylene is a type of plastic that’s known for its high durability and chemical resistance. 

It’s often used for commercial purposes - such as wall cladding in hygiene rooms used for food storage and production.

As well as white polypropylene, you can also order black polypropylene cut to size with us.  

Working with white polypropylene

When it comes to white polypropylene sheets cut to size or shape, there are a number of key features that make it ideal for a variety of different purposes. 

  • High flex - Over a certain range of deflection, white polypropylene has remarkable elastic qualities. 

  • High impact strength - white polypropylene is resistant to severe torsion and bending. 

  • Lightweight - white polypropylene is a dream for manufacturers and distributors thanks to its low density and lightweight properties. 

  • Insulation - white polypropylene conducts electricity well. It’s therefore no surprise that it’s used across a range of electrical appliances. 

  • Low cost - white polypropylene is great value for money and our bespoke sheets are very affordable across all sizes. 

  • Extremely tough - white polypropylene is very durable and an almost unbreakable plastic. 

  • Good chemical resistance - as well as being resistant to water, white polypropylene is also resistant to dilute and concentrated acids, alcohols, bases and mineral oils.  

  • Low moisture absorption - this means that it’s more than capable of withstanding almost any environment it’s used in.

FDA approved - white polypropylene sheets from The Plastic People are fully approved for food contact. 

​How to bend a white polypropylene sheet 

White polypropylene machines well - and is known for being easy to fabricate.

In terms of bending, white polypropylene can be bent in the same way as other plastics. 

Once heated beyond its operating temperature, the plastic can be bent - holding its new shape once cooled.

How to cut a white polypropylene sheet

As you’ll have gathered by looking at the quote calculator above, white polypropylene is easily cut to the shape or size you require. 

Although it’s a very durable material, with strong impact resistance, there is suitable equipment and machinery that can cut polypropylene safely. 

How to order your cut to size or shape white polypropylene

This is straightforward - as long as you have a rough idea of what measurements you need a quote for. 

For cut to size orders, sheets are available in three different thicknesses, from a 3mm white plastic sheet up to a 9mm thick sheet (measured in millimetres, centimetres and inches). 

You can also select the width (maximum 2440mm) and length (maximum 1220mm) of your sheet as well as any optional extras. 

This might include and holes drilled or any screws you order. 

The same applies to cut to shape orders - only this will depend on the shape you choose. 

If you have a different shape in mind to the six default shapes listed - you can get a quote via email. Then you can upload a drawing that will enable us to give you a more accurate quote. 

Once you go through the checkout, be sure to leave any comments in the comments box. 

It’s as simple as that - so, why not get started with a free white polypropylene sheets quote today? 

Why not check out the rest of our range of polypropylene?
Natural Polypropylene Sheets Cut to Size
Black Polypropylene Sheets Cut to Size
Black Polypropylene Sheets

Related Products

Sorry, there are currently no Accessories for this product.

Does polypropylene have good wear resistance?
Polypropylene is classed as a high wear resistant plastic as are:
•    Acetal
•    Delrin
•    Nylon 6
•    Nylon 6.6
•    Oilon
•    HDPE
•    Polyurethane
•    PEEK
•    RG1000
•    Whale Tufnol
•    UHMWPE
•    PET
 
Is polypropylene considered easy or difficult to bond?
Polyproylene is considered difficult to bond.  The following plastics are considered easy to bond: 
•    Nylon 6
•    Nylon 6.6
•    PEEK
•    PVC
•    Polyurethane
•    Tufnol
•    Acrylic
•    Polycarbonate
•    ABS    

The following plastics are considered difficult to bond: 
•    Acetal
•    Delrin
•    Oilon
•    HDPE
•    Polypropylene
•    PTFE
•    RG1000
•    UHMWPE
•    PVDF
 
Is polypropylene easy to machine?
Polyproylene is not generally considered as easy to machine. These plastics are:
•    Acetal
•    Delrin
•    Cast Nylon 6
•    Nylon 6.6
•    Oilon
•    HDPE
•    PEEK
•    PVC
•    RG1000
•    Tufnol
•    UHMWPE

 
Is polypropylene good for chemical resistance?
Polyproylene is considered good for chemical resistance as are:. 
•    Acetal
•    HDPE
•    PTFE
•    PEEK
•    PVC
•    RG1000
•    UHMWPE
 
What is the operating temperatures of polypropylene ?
100 degrees centigrade long term; 130 degrees centigrade short term. Long term typically means between 5,000 and 20,000 hours operating at this temperature without losing more than 50% of its performance. Short term typically means upto 2 hours at any one time.
 

We offer standard, next day and named day delivery services.

Our larger orders are delivered via specialist couriers and we will email you the day before their delivery.  

Whichever delivery option you choose, you will see your expected delivery date before you checkout. If you choose our standard delivery, this date is an estimate.

Standard Delivery - £9.96 

All orders are delivered using our standard delivery service unless you choose our next day service.  
 
Standard delivery is usually 5 - 7 working days. Orders with optional extras or cut-to-shape pieces can take longer.

Where possible, we will let you know if something is going to take longer than expected.


Standard delivery dates are estimated so please allow time to receive and check your order before you need to use the material or before contractors are due to begin work. If you need your delivery for a specific day, consider using either our Next Day or Named Day shipping services.

There are certain postcodes where we cannot deliver to at our offer price of £9.00. They are postcodes with prefix letters PA and PH (charged at £30) and BT, GY, HS, IM, IV, JE, KW, PO Isle of Wight, TR and ZE (charged at £40). 


Next Day Delivery -  £33.00 

We can deliver orders for clear acrylic, polycarbonate (up to 12mm thick) and silver acrylic mirror next day.  Where next day delivery is available we will offer you this choice during checkout. 

Please order before 1pm.  Orders received after 1pm will be delivered the following working day after. Working days are Monday to Friday; weekends and public holidays are excluded.

If any items ordered on a next day delivery are out of stock, we will contact you to organise alternative arrangements.

Named Day Delivery - £24.00

We have listened to your feedback & can now offer a named day delivery service across all of our products. 

Just add your plastic to your basket and select Named Day as the delivery option, and then pick your chosen delivery day. 

No more guessing when your parcels will arrive.

Simple!


  
Safe Delivery
If we think that your order cannot be delivered safely using our standard service, we will contact you to let you know and discuss the delivery options with you. This normally is only the case for orders so large they need to be delivered on a pallet.

We recommend you allow time between receiving your delivery and starting any work in case any part of your order needs to be replaced.


Collection - 
You are welcome to collect your order at our Trade Counter - please select this option during checkout.  This service is free.
 

Our Trade Counter is open from 8am until 4pm Monday to Thursday and 8am until 3pm on Fridays. We are closed on weekends and bank holidays.


To find out more about our delivery service and charges, please click here to visit our delivery information page.

Help & Advice

For more help, advice and examples of innovative use of plastic throughout the home and garden, why not visit our blog. 

Data Sheet


Download Data Sheet